Avidyne IFD540 Manual de instalación Pagina 129

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 226
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 128
AUX Pages 4-19
The center of the page will display the datablock options list for
that given slot. Those items that are displayed in bright green
text can be selected for the given slot. Those items that are
displayed in subdued grey text are not selectable for that slot
the typical reason is that there is not enough space for the item
given the content above and/or below the slot.
Restoring factory defaults is accomplished by pressing the bottom
right IFD knob and then accepting the Confirm dialog box.
Potential datablock selections are listed below (factory defaults
identified by asterisks). The format of many of the blocks
changes if they are selected to be displayed along the top
datastrip.
Datablock Item Title
and Image
Content
Primary Com/VLOC
(Note: This selection is
permanently greyed out
and is not actually
selectable)
Defines the position of the top two
datablocks along the left side. These
are permanently dedicated to
Com/VLOC control and display.
VLOC Radio
Provides a means to display the Active
and #1 Standby Nav frequencies in
slots 3 and 4 (2 lines)
Com/Nav Standby #2
Provides a means to display a 3rd com
or nav frequency (2nd standby slot) (2
lines)
Only available on left side datablocks
Note: If this field is currently in
datablock edit mode as indicated by a
blue background, then com/nav tuning
Vista de pagina 128
1 2 ... 124 125 126 127 128 129 130 131 132 133 134 ... 225 226

Comentarios a estos manuales

Sin comentarios